Osmo Uviwax Non Yellowing UV Protection - Clear and White - 125ml, 750ml and 2.5L
Osmo Uviwax Non Yellowing UV Protection - Clear and White - 125ml, 750ml and 2.5L
Osmo Uviwax Non Yellowing UV Protection - Clear and White - 125ml, 750ml and 2.5L
Osmo Uviwax Non Yellowing UV Protection - Clear and White - 125ml, 750ml and 2.5L

Osmo Uviwax Non Yellowing UV Protection - Clear and White - 125ml, 750ml and 2.5L

UVIWAX® UV-PROTECTION


UNIQUE NON-YELLOWING UV-PROTECTION

  1. UV-resistant and non-yellowing
  2. Water and dirt resistant
  3. Saliva-resistant and sweatproof, suitable for children’s toys
  4. Microporous, breathable finish which does not crack, peel or flake
  5. No sanding necessary for spot repairs or future applications

SURFACE PREPARATION

Wood surface must be clean, dry and frost-free (moisture content max. 18%, coating temperature at least +10°C).
Osmo Uviwax® UV-Protection is ready to use. Do not thin. Stir well before use.
Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works.
Degrease very resinous woods (e.g. Larch) with Osmo Brush Cleaner and Thinner.
Osmo Uviwax® UV-Protection is to be used alone and solely applied to raw wood. If necessary, sand wood again with fine sandpaper.
Wood treated with Osmo Uviwax® UV-Protection generally only need to be cleaned and recoated.
The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.

METHOD OF APPLICATION

With Osmo Flat Brush apply thinly, quickly and evenly along the wood grain and spread well, or use a spray coating method.
Allow to dry for approx. 3-4 hours under good ventilation.
If necessary, sand surface with fine sandpaper (grit P360) before applying the second coat.
After drying, apply a second coat also thinly and quickly.
For renovation works, one coat applied to the clean and dry surface is usually sufficient.

NOTE

Uviwax® UV-Protection is to be used alone. Please do not dilute or mix with other finishes.
If a surface treated with Uviwax® UV-Protection should be recoated in a different colour, we solely recommend using Osmo Interior Wax.

Using general or multi-purpose cleaners will increase the frequency of maintenance and recoating. Allow finish to fully cure before heavy usage.

CARE

Regular Cleaning: Dust mopping. Damp mopping using Osmo Spray-Cleaner.

Occasional Maintenance: Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil.

Recoating: Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.