Trade Mate Mirror Fix

Geocel Trade Mate Mirror Fix is a one-part silicone sealant for internal fixation of mirrors, coated glass or metal panels onto various substrates.

Benefits

Excellent unprimed adhesion on most glasses, metals and mirror coatings
Outstanding resistance to heat and humidity
Resistant to ozone, ultra-violet radiation and temperature extremes
Non-corrosive, odourless, ready to use gun grade sealant which reacts with air moisture

Technical Information

Where to use	Interior
Paintable	No
Sizes	310 ml
Application method	Sealant Gun and Cartridge

Application

Surface Preparation

Ensure that surfaces to be sealed are clean, dry, sound and free from grease, dust and other contaminants which could impair adhesion. Surfaces can be cleaned and degreased by wiping with a suitable solvent on a clean oil and lint-free cloth before application of sealant. Check to ensure that the mirror has been evenly coated, is protected by lacquer and is free of scratches.

Application Instructions

The sealant is ready to use. Apply 10mm wide strips vertically on the back of the mirror in 100m intervals. Then press the mirror onto the surface, preserving a constant bead thickness of 2mm for optimum cure and mechanical grab. Support the mirror for a minimum of 24 hours using adhesive tapes. This will ensure good contact and a minimum of displacement. Air should be allowed to circulate freely around the edges of the mirror thereby allowing the sealant to cure.

Clean up

Excess sealant may be cleaned off tools and non-porous surfaces whilst in an uncured state using DOWSIL™ R-40 Universal Cleaner. If sealant is misapplied to porous substrates, it should be left until just cured, and then removed by peeling, cutting or other mechanical means. Care should be taken not to damage plastic or coated surfaces.