Armstead Trade Smooth Masonry Paint is a professional quality, smooth exterior emulsion paint. It has an attractive high build finish and provides excelllent coverage and application. It is also BBA certified to provide up to 15 years protection and is shower-resistant in 30 minutes

• Up to 15 years protection
• Shower resistant in 30 minutes
• Water based

Drying time (recoat)	2-4 hours
Drying time (touch dry)	1-2 hours
Suitable Surface	Masonry
Coverage	From 6 to 12m2 /litre depending on surface texture
General No. of Coats	2
Application description	STIR THOROUGHLY BEFORE USE. On very absorbent surfaces a sealing coat of thinned Armstead Trade Smooth Masonry (up to 1 part clean water to 5 parts paint) should be applied. The normal finishing process is 1 or 2 full coats of Armstead Trade Smooth Masonry. Touch Dry: 1-2 hours. Recoat: 2-4 hours. Drying time will vary according to temperature and humidity e.g. the drying times quoted will be significantly longer in cold, damp conditions. Coverage up to 12m²/l depending on surface texture. These figures are only an approximate guide and may be reduced. If in doubt, apply a small trial area.
Cleaning	Cleaning After Final Use: Clean brushes and rollers immediately after final use to reuse them for future projects, saving you money and reducing waste. Cleaning Steps: 1. Remove Excess Paint: Scrape off leftover paint into a container for reuse. 2. Wash with Warm, Soapy Water: Clean brushes and rollers with warm soapy water in a sealed container like a bucket or tub. 3. Rinse Thoroughly: Rinse out all soap and paint residues into the same container. 4. Dry Naturally: Let tools air-dry and store in a dry, dust-free area. Dispose Responsibly: Settle Solids: Let paint solids settle at the bottom of the container. Pour off clear water for reuse or disposal. Disposal: Let remaining paint solids dry fully before disposing of them as solid waste. Do not flush paint down the drain, including when cleaning painting tools