Geocel The Works Pro Sealant and Adhesive 290ml Cartridge
THE WORKS PRO Sealant & Adhesive
Geocel THE WORKS PRO is a high performance sealant and adhesive, which can be used internally or externally on almost any surface and in wet or dry conditions. Using THE WORKS PRO, there is no shrinking, no staining, no solvents and no need for additional fixings for most applications.Benefits
Use on wet or dry surfacesCures underwater
Bonds and seals virtually any material
Paintable
Resists mould growth
Excellent service temperature range
Excellent resistance to UV
Substrate Type
- Wood
- Metal
- Glass
- Stone
- Plastic
- Masonry
- Polystyrene
- Concrete
- Brick
- Tile
- Plaster
- Wet surfaces
Technical Information
| Where to use | Interior/Exterior |
| Paintable | Yes |
| Skin Overtime | 15 min |
| Time to cure | 24 hours |
| Time to cure disclaimer | 3mm per 24 hours |
| Container Type | Cartridge |
| Shelf life | 1 year |
| Sizes | 290 ml |
| Application method | Sealant Gun and Cartridge |
Application
Surface Preparation
Ensure substrates, gaps and cracks are clean and free from dust, dirt and grease.
Application Instructions
Remove nozzle and cut off the tip of the cartridge. Replace the nozzle and cut the tip to the required width at a 45 degree angle. To secure: Apply Geocel The Works Pro in dots or beads. Once applied, surfaces should be firmly pressed together. To seal: Apply a continuous bead of Geocel The Works Pro ensuring it makes full contact with the sides and back of the joint. Tool within 5 minutes for a professional finish.
Clean up
Uncured sealant can be removed with THE WORKS Spray Multi Use Cleaner or a suitable solvent.