Liming Wax is a white wax used to create a limed effect on oak and other interior hardwoods.
Perfect for use on Oak, Elm and other hardwoods
12-16m² Per Litre
Minimum 5 minutes
Ensure the surface is clean, dry and free from any previous finishes. Open the grain with a Liberon Bronze Liming Brush. On softwoods such as pine, use a wire brush or coarse abrasive paper to score the timber.
If you wish to enhance the effect, colour the wood with Liberon Palette Wood Dye before applying the liming wax. Liberon Palette Wood Dyes are available in a wide selection of wood shades.
Work the liming wax into the grain of the wood with Liberon Ultra fine Steel Wool (0000) or a lint-free cotton cloth and wipe over with a clean cloth to remove excess. Allow to dry for 3 minutes.
Remove the white haze using a cloth and Wax Polish Black Bison Neutral, or if a water-resistant finish is required, with Liberon Finishing Oil.
Apply a second coat of Wax Polish Black Bison and buff or add another coat of oil. The more coats of oil that are applied the greater the water resistance and the higher the shine.
Important: Always test product on a spare surface or inconspicuous area for colour, compatibility and end result.