Liberon Superior Danish Oil - Enhances and Protects Wood - All Sizes

Superior Danish Oil is a blend of pure, high quality tung oil and natural oils that feed, enhance and protect hard and soft woods. It is a penetrating oil, which brings out the natural grain of the timber and provides a satin to gloss sheen. With added UV filters to help prevent discolouration from the sun, and water, heat and alcohol resistant, it is suitable for both interior and exterior use. It is safe for use on toys.

  • Blend of pure Tung Oil and natural oils
  • Feeds, protects and enhances the natural colour of wood
  • Added UV filter for protection against sunlight
  • Water, heat and alcohol resistant
  • Quick drying formula
  • Suitable for interior and exterior use


10-12m² per Litre


Minimum 5 hours


Brush or cloth


Approximately 10-12 Sqm per Litre


Interior woodwork:

Apply with a brush or lint-free cotton cloth and allow to penetrate for five to 10 minutes before wiping off excess with a clean lint-free cloth. Allow to dry for a minimum of five hours and apply more coats as required. We recommend a minimum of three coats. For best results gently rub with Ultra Fine Steel Wool (Grade 0000) between coats. In damp areas, such as kitchens and bathrooms, more coats will be required to ensure adequate protection.

Exterior woodwork:

Apply as above. Application of four coats will give minimum protection. Exposed areas will require more coats. It is important to ensure sufficient coats of oil are applied initially to give maximum protection. It is not necessary to remove excess on sawn timber, but wipe off any runs.


Oil finishes bring out the natural colours of timber. A wet surface will be an indication of the final colour. Always test the product on spare surface of inconspicuous area for colour, compatibility and end result.