Osmo UV Protection Oil Extra - Clear - Matt 2.5L + 20% EXTRA FREE

Osmo UV Protection Oil Extra - Clear - Matt 2.5L + 20% EXTRA FREE

About this item

  • ULTIMATE WOOD SHIELD – Keep your outdoor wooden surfaces looking beautiful and protected with the Osmo UV-Protection Oil Extra. This wood preserver outdoor oil has been developed to slow the greying process and enhance the natural character of your outdoor wooden surfaces.
  • LONG-LASTING PROTECTION – An extremely durable and hard wearing wood oil that is highly water and dirt-resistant, moisture regulating and reduces wood swelling. This wood sealer ensures a microporous, penetrating finish that does not crack, peel, or flake, and is safe for humans, plants, and animals when dry.
  • VERSATILE USAGE – This outdoor wood protector is perfect for various external wood surfaces such as windows, doors, cladding, fencing and other vertically structured joinery that are prone to sun damage. This wood preservative offers excellent coverage of up to. 18㎡/L with one coat.
  • NATURAL FORMULA WITH BIOCIDES – Formulated from vegetable oils and waxes, the Osmo UV-Protection Oil Extra 1420 Clear Matt contains biocides to protect against algae, mildew and fungal attack. The wood preserver is safe to use while offering long-term wood protection.
  • EASY WOOD APPLICATION – Prepare wood surface by making sure it’s clean, dry and frost free. Sand surfaces, then apply the first coat. Dry for 12 hours, and apply the second coat thinly. Fresh wood containing natural wood ingredients need to weather off first before applying the product.

Product description

Protect your exterior wooden surfaces with this specialised UV-Protection Oil Extra 1420. Designed specifically for vertically structured wood, this clear matt finish oil safeguards against the harsh effects of sun exposure whilst maintaining the natural beauty of your timber. The formula penetrates deeply into the wood grain, providing a water-repellent finish that helps prevent greying and degradation of the wood surface. Perfect for outdoor wooden cladding, doors, windows, and other vertical wooden structures, this oil enhances the natural character of the wood whilst offering reliable protection against UV rays. The matt finish ensures a subtle, natural appearance that won't mask the wood's authentic texture. For optimal results, apply to raw or previously Osmo oiled wooden surfaces in dry conditions. Regular maintenance will help preserve the protective qualities and appearance of your wooden surfaces.

Directions

Surface Preparation: Wood surface must be clean, dry and frost-free (moisture content max. 20%). Ideally, surfaces are sanded no finer than a P120 grit grade of sand paper. Sanding to finer grades will reduce required absorbency. Osmo UV-Protection Oil Extra is ready to use. Do not thin. Stir well using a flat stirring stick or spatula before use. If possible, and if the wood is an absorbent species, please apply the first coat to all sides before installation. Fresh wood containing natural wood ingredients/extractives (eg: Cedar, Larch, Teak, Mahogany or Iroko) are often less absorbent and need to weather off first before applying the product. Please refer to website ‘Suitability’ section for more details. Weathering helps ingredient rich wood become more absorbent and the wood finish adheres optimally. Weathering is also required if ingredient rich wood has been freshly sanded or renovated. A coloured base coat is recommended, e.g. Natural Oil Woodstain. Coloured base coats can improve UV protection. For renovations, clean old microporous wood finishes thoroughly. De-grey any weathered bare wood with Osmo Wood Reviver Power-Gel before applying an Osmo exterior product. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. To maintain absorbency, avoid sanding surfaces finer than a P120 grit. Weather ingredient rich wood after sanding. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. Soft wood species like Pine or Spruce are more prone to blue stain, rot and insects. If desired, pre-treat these soft woods if possible on all sides with Osmo WR Base Coat.

Method of Application: With an Osmo Flat Brush or Osmo Microfibre Roller, apply thinly along the wood grain and spread well. Allow to dry for approx. 12 hours. Cooler temperatures, higher humidity levels or over application will delay drying. Once dry, apply the second coat thinly. When recoating colour treated surfaces, or for renovation works, one coat applied to the clean and dry surface is usually sufficient.

Note: Oils enhance and intensify the natural tone of wood (permanent wet effect). Depending on the degree of weathering, apply one coat of Osmo UV-Protection Oil Extra to the cleaned and intact finish after approx. 3-4 years. Osmo UV-Protection Oil Extra is best suited to vertical structures whereby there is plenty of water run-off. For areas exposed to strong weathering, such as flat horizontals, weatherboard, post caps or window sills, please expect significantly shorter renovation intervals. Vertical elements mounted onto horizontal wood should have at least a 15 degree angle. Sharp edges must be rounded (radius > 2 mm). If the greying process has already begun, de-grey the surface with Osmo Wood Reviver Power-Gel and refinish the dried surface with 2 thin coats of Osmo UV-Protection Oil Extra. To achieve the UV-protection factor 12, it is necessary to apply 2 thin coats of UV-Protection Oil Extra. With only one coat on untreated wood, the life of the coating is significantly shorter. Using power washers will severely decrease the coverage of the finish and general or multi-purpose cleaners will increase the frequency of maintenance and recoating.