Ronseal Quick Drying Smooth Finish Wall Filler Ready Mixed White - 660g or 330g

Quick Drying Smooth Finish Filler


Reclaim your afternoon and fill holes quickly instead of spending hours on the job. Our Quick Drying Filler gets the job done in only 30 minutes and can fill gaps in walls up to 10mm. It leaves a smooth finish that can be painted over so the repair blends in.

Fast acting and ideal for last minute repairs

Dry in 30 minutes

Fills holes up to 10mm

Can be drilled once it’s dry

Suitable for plaster, stone, concrete and wood

Available in tubs or tubes

How to use Quick Drying Smooth Finish Filler

Before you start

Ensure the surface and cracks are clean, dry and free from dust, grease and other contamination.


  1. Firmly push the filler into the hole or crack leaving some slightly raised above the surface to ensure the hole is properly repaired.
  2. Before the filler dries, smooth it with a wet knife.
  3. If the hole you are filling is bigger than 10mm, you will need to build the layers up. After you’ve smooth over the first layer, leave it to dry for 30 minutes and then apply another. Repeat the process until the hole is filled.


Once your filler is dry, it will be ready to paint over.


Tools can be cleaned in warm, soapy water.

Technical Specification

Usage Interior design like plaster, stone, concrete and wood.
Coverage Fills holes up to 10mm
Dry time 30 minutes
Coat time 30 minutes
Number of coats One for holes up to 10mm, several for deeper holes
Colours White
Finish Matt
Durability Quickly fills holes and leaves a tough finish that can be drilled
Application Flat scraper
Sizes 330g, 600g.
VOC Minimal