Toupret Exterior Masonry Repair Filler (Touprelith F)
MASONRY REPAIR FILLER
CAN BE APPLIED TO DRY OR DAMP MASONRY:
Will fill without shrinking to any depth limit and repair without formwork. Weather resistant, it's also easy to shape. Can be used on all rough masonry surfaces: cement, concrete, breeze blocks, bricks and stones. Overcoat 48-72 hours from application with any standard water-based masonry paint or mineral paint. If using polyurethane or epoxy solvent-based paints, first prime with a water-based exterior paint.
Warning - Please carefully follow usage instructions and refer to the technical data sheet.
Will fill without shrinking to any depth limit and repair without formwork. Weather resistant, it's also easy to shape. Can be used on all rough masonry surfaces: cement, concrete, breeze blocks, bricks and stones. Overcoat 48-72 hours from application with any standard water-based masonry paint or mineral paint. If using polyurethane or epoxy solvent-based paints, first prime with a water-based exterior paint.
Warning - Please carefully follow usage instructions and refer to the technical data sheet.
- Weather resistant
- Shapeable - repair without formwork
- No need to seal the substrate *
Surface condition: Exterior
Task: Filling and repairing (holes, gaps, cracks)
Shaping and repairing without formwork
Shaping and repairing without formwork
Application method: Manual
Time between coats: As soon as the filler is dry
Surfaces: Can be applied to all rough masonry
surfaces damp or dry: cement, concrete, breeze blocks, bricks and stone.
surfaces damp or dry: cement, concrete, breeze blocks, bricks and stone.
Overcoat with: Can be overcoated with any type of filler, paint or wall coating.
Do not coat directly with polyurethane paints nor epoxy solvent based paints.
Do not coat directly with polyurethane paints nor epoxy solvent based paints.
Ready to paint time: 48 to 72 Hours
Working time: 30 min
Application tools: Filling knife, Blade, Trowel.
Recommended temperature and humidity for application:
Do not apply at a temperature below 5°C or above 35°C nor at a relative humidity over 80%.
Adhesion: Adhesion filler/substrate (EN 16-566): > 0.8 Mpa
Colour when dry: Light grey
Guarantee: Product guaranteed for 6 months from purchase, in original package and stored away from humidity.
Clean tools with: Water.