Toupret Skim & Fill Joint

Toupret Skim & Fill Joint

Characteristics

SURFACE FINISHING, FILLING & JOINTING:
Suitable for interior use. Easy to sand and apply in one coat with no shrinkage and no depth limit. Conforms to BS EN 13963 for jointing applications.

The typical recommended application thickness for plasterboard skimming and jointing is 0.5mm. This product can also be used for more substantial levelling applications.
  • One coat
  • Easy to sand
  • No shrinkage, no depth limit
  • No need to spot prime

Key Features:

  • Surface Condition: Specifically designed for interior use.
  • Tasks: Perfect for filling and repairing holes, gaps, and cracks, as well as jointing and skimming plasterboard.
  • Application Method: Easy manual application using a filling knife, blade, or trowel.
  • Time Between Coats: Reapply as soon as 1 hour after the previous coat.
  • Surfaces: Suitable for a wide range of surfaces, including:
    • Gypsum, plasterboard, old painted surfaces, cement, concrete, cellular concrete, and primed wood.
  • Overcoat With: Can be overcoated with any type of filler, paint, or wall coating.
  • Maximum Application Thickness: No depth limitation for maximum flexibility.
  • Mixing Rate: Ready to use, no mixing required.
  • Ready to Paint Time: Paint over in 12 to 24 hours.
  • Working Time: Provides 40 minutes of working time.

Application Instructions:

  • Recommended Temperature and Humidity: Apply at temperatures between +8°C and +35°C and a relative humidity below 70%.
  • Adhesion: Strong adhesion (EN 16-566): > 0.5 Mpa.
  • Coverage: Approximately 1100 g/m² at 1mm thickness.
  • Indoor Air Quality Classification: Rated A+ for excellent indoor air quality.
  • Colour When Dry: Dries to a clean white finish.
  • Guarantee: Product guaranteed for 12 months from purchase, in original package and stored away from humidity.
  • Clean Tools With: Clean up easily with water.

Usage Tips:

  • Use a filling knife, blade, or trowel for precise application depending on the task.
  • Ensure the surface temperature and humidity conditions are within the recommended range for optimal adhesion and drying.
  • Store the product in its original package away from humidity to maintain its quality and guarantee.